A lot of things can interfere, e.g.
Overall wifi is just crap. You shouldn't rely on it as your main network if you have any choice of using cable ethernet.
Comment has been collapsed.
This. Use Ethernet, if that's not viable then use Powerline adapters. Even with my old house's crappy wiring I still get a solid 100Mb (using 500Mb adapters, although they only have 100Mb ports so they can't go any faster anyway. Manufacturer logic).
Comment has been collapsed.
It seems pretty absurd that the device is capable of 500 Mbps, but have only 100 Mbps ports. Are you sure you are using CAT 5e or CAT 6 cables?
Comment has been collapsed.
Seems pretty sensible to me, there's only 1 set of power cables and plenty of power sockets to plug powerline adapters into after all. You could theoretically have 5 devices sending data at 100Mbps each to 5 other devices and saturate the Powerline part of the network.
Comment has been collapsed.
mostly what cyberkiller listed, older homes with lead pipeing can down-grade signals as well. With other wireless signals and such, most routers, if not all, allow you to change your channel, which cuts back on any other interference like phones and other routers nearby. Wireless is really not ideal for gaming at all, you can always expect to get cut-off one way or another. I suggest looking closely in your router settings, start with the channel and then maybe try adding your mac address to the router for a more stable connection
Comment has been collapsed.
Our wireless baby monitor fills every 2.4 channel and completely wipes out router traffic. Any wideband 2.4 GHz wireless device will absolutely muller your routers wireless bandwidth. It's especially frustrating because you can still connect at full strength.
Have you scanned to find an empty channel? It's possible that your neighbours and you are trying to use the same channel.
Comment has been collapsed.
Most of the time when my brother or his lame ass friend enters my wifi's AOE it cuts out >.>
Comment has been collapsed.
Telephones are a major source of interfering with both WLAN and the basic functioning of any nearby other device. Do not build towers with your devices. Make sure every device is at least 1m apart from another. Of course some may still work flawlessly if you staple them or have them really next to each other, but some seriously do not for no apparent reason. You'll have to try and you might get surprised that spreading all your stuff apart can help.
Comment has been collapsed.
1 Comments - Last post 1 hour ago by lostsoul67
35 Comments - Last post 3 hours ago by Taurus9534
0 Comments - Created 3 hours ago by cihs
9 Comments - Last post 5 hours ago by pb1
1,966 Comments - Last post 7 hours ago by MBaer
304 Comments - Last post 10 hours ago by Luacs
302 Comments - Last post 10 hours ago by duville
0 Comments - Created 2 minutes ago by macgamer
413 Comments - Last post 25 minutes ago by CryinOrion
104 Comments - Last post 43 minutes ago by Vaart
3,040 Comments - Last post 53 minutes ago by damianea103
5 Comments - Last post 1 hour ago by lordmonty3
91 Comments - Last post 1 hour ago by schmoan
1,840 Comments - Last post 2 hours ago by Jztr
What can interfere with Wireless Router signal? Like,i re-located some erm,one microwave oven and one heating oven ( extra ones,small square/rectangular-ish ones you know ) sort of like in the corner of an reversed L (completely reversed ) & the deskop & router are in the shorter side of the balcony,the side in front of the kitchen and in my bedroom sort of at teh end of the larger side of the L & in the kitchen somewhere near the corner i guess it's those two ovens (microwave and normal heating ones) but they arent turned on, i rarely use them,almost never xD..a few times a year i think,usually use the normal oven lol.
Not sure what else can interfere
Comment has been collapsed.