Probably yes. USB cable i USB cable:) If you know how to attach it, you should be fine. My firend replaced many USB cables in many devices and everything worked fine.
The real problem is Micro-USB which is common in mobile devices. It has 5 pins and sometimes the additional pin is connected (with optional resistor) to +5, sometimes to GND (also with optional resistor):)
Normal USB shouldn't be a problem.
EDIT: some typos:)
Comment has been collapsed.
USB connectors are pretty standard on the inside, so it should work. Just crack open your mouse (this will probably require removing the teflon pads on the bottom of the mouse and unscrewing whatever's behind them - keep in mind this probably might mean that you'll need new teflon pads) unplug the old cord, and plug in the new one, in the same orientation. Tada.
Comment has been collapsed.
69 Comments - Last post 1 hour ago by SebastianCrenshaw
14 Comments - Last post 2 hours ago by vinirockman
979 Comments - Last post 2 hours ago by InSpec
394 Comments - Last post 3 hours ago by GarlicToast
47,455 Comments - Last post 3 hours ago by ManOman
948 Comments - Last post 3 hours ago by MeguminShiro
1,740 Comments - Last post 3 hours ago by colddim
149 Comments - Last post 5 minutes ago by kpax83
102 Comments - Last post 13 minutes ago by DrPower
313 Comments - Last post 14 minutes ago by VahidSlayerOfAll
6 Comments - Last post 51 minutes ago by xXxYEET
59 Comments - Last post 54 minutes ago by duville
150 Comments - Last post 1 hour ago by Slide95
74 Comments - Last post 1 hour ago by Oppenh4imer
Hello! I'm some teeny-weeny thingy and I do care about the brands. I could get Razer Lachesis for $9 but there is a problem, the USB part it cut off. Could I use a Logitech G9X cable to replace the Razer's cable? Thanks in advance :)
Comment has been collapsed.